120 W RMS STEREO AMPLIFIER
with Bluetooth and USB / SD
AMU-120BTSR
7 ANALOG AUDIO INPUTS
Speakers and audio inputs, Phono and Bluetooth
PERFECT FOR YOUR HOME
Combines in all the atmospheres
Bluetooth Connection
Output Power
Play your MP3 from your USB
Play your MP3 from your SD Card
Wired Mic Output
Headphone Output
RCA Audio Input / Output
Quad Speakers
REC Out / Line Out
Loudness + EQ Bypass
Bass & Treble Controls
Dot Matrix Display
White Ambient Light
General Specifications
120 W RMS STEREO AMPLIFIER with BLUETOOTH and USB/SD-MP3 Player.
Suitable for all type of place ambients.
Anodized Aluminium front panel (Brushed Hairline Finishing).
Digital Rotary Aluminium Controller for Volume/Treble/Bass/Balance Control with digital readout.
White LED Ambient Light Bar (3D PRISM type) under display on front panel.
LOUDNESS Control button for Audio EQ Enhancement at Night-time.
Connection Specifications
BT v5.0 Receiver Built-In with Scrolling Media Info on dot-matrix display and 10 mts wireless range.
USB-port + SD-Card slot (in front panel) for MP3 playback, up to 128GB memory readable, with Scrolling id3-Tag song info on display.
7 ANALOG AUDIO INPUTS : PHONO (MM), CD/SACD, AUX-IN 1, AUX-IN 2, AUX-IN 3, MIC, BT.
Rec-Out/Line-Out Analog Stereo Output Included.
6.35mm (1/4 inch) STEREO Headphone-Output Jack built-in.
6.35mm (1/4 inch) MICROPHONE-Input Jack built-in.
QUAD Speaker Connections (with Selector for 2x Stereo Speakers A and B).
Phono Input with Built-In Pre-Amp and RIAA EQ, with Phono Ground (GND).
Terminal Connection.
Audio Specifications
Output power 120W (2x 60W RMS ).
Tone control BASS & TREBLE independant adjustments +/- 10dB.
CHANNEL SEPARATION >80dB@1kHz.
High Quality FET Power Amplifier circuit (S/N for AUX–In > 100dB, S/N for USB+SD/MP3 and Phono–In >83dB).
Gold Plated A and B Non Magnetic Speaker Terminals. Impedance= A/B speaker : 4-8 ohm，A+B speaker : 8-16 ohm.
Features
DIRECT button for EQ Bypass.
Fully Alphanumeric 16 char x 2 lines dot matrix display with White-LED backlighting and Tinted Prism Lens.
Anodized Aluminium front panel (Brushed Hairline Finishing).
ANTI-VIBRATION RISER Feet with Rubber (Silicone) Pads.
Full Function Remote Controller in Metallic Finishing with Silicone Rubber Buttons, including MP3/BT Playback controls.
Built In DUAL Power Supplies ( SMPS for Standby Mode, Toroidal Transformer for Main Operation).
Hardware ON/OFF Toggle Master Power Switch included.
Dimensions 430 x 100 x 292mm.
Weight: 6,5 Kg.
Extra Long AC-Power Cord : 2 mts Length.
What’s in the box?
AMU-120BTSR
RCA (M) to 3.5mm(M) Stereo Cable (1.5M length)
RCA-to-RCA (Male-Male) STEREO Cable 1.2m Length
Remote control
AIWA Brand AAA Size Alkaline Batteries x 2pcs
User Manual
Warnings
Social Media Card
DOWNLOAD
Datasheet AMU-120BTBK
DOWNLOAD
User Manual
FREQUENTLY ASKED QUESTIONS
The equipment does not turn on.
- Disconnect the power plug from the socket and then reconnect it.
The receiver suddenly turns off.
- When the Auto Power Down function is active, the power will automatically turn off if the receiver has not been operated for several hours.
- Check the settings of the Auto Power Down function.
- Make sure there are no loose wires from the speaker cables touching the rear panel. This may cause the receiver to shut down automatically. After about one minute (you should not turn the unit on during this time), turn the receiver back on.
No sound output when an input function is selected.
- Use VOLUME +/- to increase the volume.
- Press MUTE on the remote control to unmute.
- Set the AUDIO SEL o H (HDMI), C1/O1 (digital) or A (analogue) depending on the type of connections made (page 18).
- Make sure you have connected the component correctly (see Connecting the equipment on page 10).
- Check the audio output settings of the source component.
- Refer to the instruction manual supplied with the source component.
RELATED PRODUCTS
AMU-120BTBK
APX-680BT
